 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PQXXXDNA1ZPH Series PQXXXDNA1ZPH Series Compact Surface Mount type Low Power-Loss Voltage Regulators Features 1.Output current : 1A 2.High isolation voltage VIN:MAX.24 V 3.Low dissipation current (Dissipation current at no load: MAX. 8mA Output OFF-state dissipation current: MAX.5A) 4.Built-in ON/OFF function 5.Built-in overcurrent and overheat protection functions 6.Built-in ASO protection function 7.Ceramic capacitor compatible 8.RoHS directive compliant Outline Dimensions (Unit : mm) 6.6MAX. 5.20.5 3 2.10.5 (0.3) Epoxy resin 2.5MIN. 5.50.2 0.7 MAX. 050DNA1 H 9.7MAX. Lead finish identification mark (00.25) (0.3) Applications 1.AV equipment 2.OA equipment 1 2 4 5 4-(1.27) ( ) : Typical dimensions Product mass:(0.2g) Model Line-up 1 3 Output Voltage (TYP.) 3.3V 5.0V 8.0V 9.0V 12.0V Model No. PQ033DNA1ZPH PQ050DNA1ZPH PQ080DNA1ZPH PQ090DNA1ZPH PQ120DNA1ZPH 1 2 3 4 5 Specific IC 2 5 DC input (VIN) ON/OFF control terminal (VC) DC output(VO) NC GND Lead finish:Lead-free solder plating (Composition: Sn2Cu) Absolute Maximum Ratings (Ta=25C) Parameter Symbol *1 VIN Input voltage *1 Output control voltage VC IO Output current *2 Power dissipation PD *3 Junction temperature Tj Operating temperature Topr Tstg Storage temperature Soldering temperature Tsol Rating Unit V 24 24 V A 1 8 W 150 C C -40 to +85 -40 to +150 C C 260(10s) *1 All are open except GND and applicable terminals. *2 PD: With infinite heat sink *3 Overheat protection may operate at Tj:125C to 150C Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: OP06051 (0.9) 0.3 +0.2 -0.1 (1.7) PQXXXDNA1ZPH Series Electrical Characteristics (1) PQ033DNA1ZPH (Unless otherwise specified,condition shall be VIN=5V,IO=0.5A,VC=2.7V,Ta=25C) Parameter Output voltage Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection Dropout voltage 5 Symbol VO RegL RegI TCVO RR VI-O VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs Conditions - MIN. 3.218 TYP. 3.3 0.2 0.2 0.01 60 0.2 MAX. 3.382 1.0 1.0 Unit V % % %/C dB V V A V A mA A IO=5mA to 1A VIN=4 to 14V,IO=5mA Tj=0 to +125C, IO=5mA Refer to Fig.3 VIN=3.5V,IO=0.5A ON-state voltage for control ON-state current for control OFF-state voltage for control OFF-state current for control Quiescent current Output OFF-state dissipation current VC=2.7V 2.0 0.5 - VC=0.4V IO=0A IO=0A, VC=0.4V - 4 200 0.8 2 8 5 - 5 In case of opening control terminal , output voltage turns off (2) PQ050DNA1ZPH (Unless otherwise specified,condition shall be VIN=7V,IO=0.5A,VC=2.7V,Ta=25C) Parameter Output voltage Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection Dropout voltage 5 Symbol VO RegL RegI TCVO RR VI-O VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs Conditions - MIN. 4.875 TYP. 5.0 0.2 0.2 0.01 60 0.2 MAX. 5.125 1.0 1.0 Unit V % % %/C dB V V A V A mA A IO=5mA to 1A VIN=6 to 16V,IO=5mA Tj=0 to +125C, IO=5mA Refer to Fig.3 4 ,IO=0.5A ON-state voltage for control ON-state current for control OFF-state voltage for control OFF-state current for control Quiescent current Output OFF-state dissipation current VC=2.7V 2.0 0.5 - VC=0.4V IO=0A IO=0A, VC=0.4V - 4 200 0.8 2 8 5 - 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. 5 In case of opening control terminal , output voltage turns off (3) PQ080DNA1ZPH (Unless otherwise specified,condition shall be VIN=10V,IO=0.5A,VC=2.7V,Ta=25C) Parameter Output voltage Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection Dropout voltage 5 Symbol VO RegL RegI TCVO RR VI-O VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs Conditions - MIN. 7.8 TYP. 8.0 0.2 0.2 0.01 60 0.2 MAX. 8.2 1.0 1.0 Unit V % % %/C dB V V A V A mA A IO=5mA to 1A VIN=9 to 19V,IO=5mA Tj=0 to +125C, IO=5mA Refer to Fig.3 4 ,IO=0.5A ON-state voltage for control ON-state current for control OFF-state voltage for control OFF-state current for control Quiescent current Output OFF-state dissipation current VC=2.7V 2.0 0.5 - VC=0.4V IO=0A IO=0A, VC=0.4V - 4 200 0.8 2 8 5 - 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. 5 In case of opening control terminal , output voltage turns off Sheet No.: OP06051 2 PQXXXDNA1ZPH Series (4) PQ090DNA1ZPH (Unless otherwise specified,condition shall be VIN=11V,IO=0.5A,VC=2.7V,Ta=25C) Parameter Output voltage Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection Dropout voltage 5 Symbol VO RegL RegI TCVO RR VI-O VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs Conditions - MIN. 8.775 TYP. 9.0 0.2 0.2 0.01 60 0.2 MAX. 9.225 1.0 1.0 Unit V % % %/C dB V V A V A mA A IO=5mA to 1A VIN=10 to 20V,IO=5mA Tj=0 to +125C, IO=5mA Refer to Fig.3 4 ,IO=0.5A ON-state voltage for control ON-state current for control OFF-state voltage for control OFF-state current for control Quiescent current Output OFF-state dissipation current VC=2.7V 2.0 0.5 - VC=0.4V IO=0A IO=0A, VC=0.4V - 4 200 0.8 2 8 5 - 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. 5 In case of opening control terminal , output voltage turns off (5) PQ120DNA1ZPH (Unless otherwise specified,condition shall be VIN=14V,IO=0.5A,VC=2.7V,Ta=25C) Parameter Output voltage Load regulation Line regulation Temperature coefficient of output voltage Ripple rejection Dropout voltage 5 Symbol VO RegL RegI TCVO RR VI-O VC(ON) IC(ON) VC(OFF) IC(OFF) Iq Iqs Conditions - MIN. 11.7 TYP. 12.0 0.2 0.2 0.01 60 0.2 MAX. 12.3 1.0 1.0 Unit V % % %/C dB V V A V A mA A IO=5mA to 1A VIN=13 to 23V,IO=5mA Tj=0 to +125C, IO=5mA Refer to Fig.3 4 ,IO=0.5A ON-state voltage for control ON-state current for control OFF-state voltage for control OFF-state current for control Quiescent current Output OFF-state dissipation current VC=2.7V 2.0 0.5 - VC=0.4V IO=0A IO=0A, VC=0.4V - 4 200 0.8 2 8 5 - 4 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. 5 In case of opening control terminal , output voltage turns off Fig.1 Example of application 1 3 VO VIN CIN 5 2 CO Load ON/OFF signal High:Output ON Low or Open:Output OFF Sheet No.: OP06051 3 PQXXXDNA1ZPH Series Fig.2 Test Circuit VIN 1 3 A 2 VC A Iq IC 10F IO VO 1F 5 A V RL Fig.3 Test Circuit for Ripple Rejection + 1 ei ~ 2 VIN 1F 5 2.7V VC 10F V ~ RL 3 IO eo f=120Hz(sine wave) ei(rms)=0.5V VIN= 5V (PQ033DNA1ZPH) 7V (PQ050DNA1ZPH) 10V (PQ080DNA1ZPH) 11V (PQ090DNA1ZPH) 14V (PQ120DNA1ZPH) IO=0.3A RR=20log(ei(rms)/eo(rms)) Fig.4 Power Dissipation vs. Ambient Temperature 10 Fig.5 Overcurrent Protection Characteristics (PQ033DNA1ZPH) 4.0 3.5 VIN=9V VIN=7V Power dissipation PD (W) 8 Output voltage VO (V) 3.0 2.5 VIN=15V VIN=24V VIN=12V VIN=3.8V 5 2.0 1.5 1.0 0.5 VIN=5V 0 -40 -20 0 25 50 75 85 100 125 150 0 0 VC=2.7V CIN=1F CO=10F Ta=Room temp. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Ambient temperature Ta (C) Note) Oblique line portion:Overheat protection may operate in this area. Output current IO (A) Sheet No.: OP06051 4 PQXXXDNA1ZPH Series Fig.6 Overcurrent Protection Characteristics (PQ050DNA1ZPH) 5.5 5.0 VIN=5.5V VIN=7V Fig.7 Overcurrent Protection Characteristics (PQ090DNA1ZPH) 10 VIN=12V Output voltage VO (V) Output voltage VO (V) 8 VIN=24V 4.0 VIN=15V VIN=9.5V VIN=15V VIN=20V VIN=11V VIN=12V 3.0 VIN=24V VIN=9V 6 2.0 1.0 0 VC=2.7V CIN=1F CO=10F Ta=Room temp. 4 2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.7 0 0 VC=2.7V CIN=1F CO=10F Ta=Room temp. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.7 Output current IO (A) Output current IO (A) Fig.8 Overcurrent Protection Characteristics (PQ120DNA1ZPH) 13 12 VIN=15V Fig.9 Output Voltage vs. Ambient Temperature (PQ120DNA1ZPH) 12 11.98 VIN=14V VC=2.7V IO=0.5A CIN=1F CO=10F Output voltage VO (V) Output voltage VO (V) 10 8 6 4 2 0 11.96 11.94 11.92 11.9 11.88 11.86 11.84 11.82 11.8 -50 VIN=24V VIN=12.5V VIN=17V VIN=14V VC=2.7V CIN=1F CO=10F Ta=Room temp. 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.7 -25 0 25 50 75 100 125 150 Output current IO (A) Ambient temperature Ta (C) Fig.10 Output Voltage vs. Input Voltage (PQ120DNA1ZPH) 14 12 Fig.11 Circuit Operating Current vs. Input Voltage (PQ120DNA1ZPH) Circuit operating current IBIAS (mA) 26 24 20 16 12 RL=12 (IO=1A) 8 4 0 0 2 4 RL=24 (IO=0.5A) RL= (IO=0A) 6 8 10 12 14 15 VC=2.7V Ta=Room temp. CIN=1F CO=10F Output voltage VO (V) 10 8 RL= (IO=0A) RL=24 (IO=0.5A) 6 4 2 0 0 2 4 6 8 RL=12 (IO=1A) VC=2.7V Ta=Room temp. CIN=1F CO=10F 10 12 14 16 18 Input voltage VIN (V) Input voltage VIN (V) Sheet No.: OP06051 5 PQXXXDNA1ZPH Series Fig.12 Quiescent Current vs. Ambient Temperature (PQ120DNA1ZPH) 4 3.8 3.6 3.4 3.2 3 2.8 2.6 2.4 2.2 2 -50 -25 0 25 50 75 100 125 150 VIN=14V VC=2.7V IO=0A CIN=1F CO=10F Fig.13 Dropout Voltage vs. Ambient Temperature (PQ120DNA1ZPH) 0.3 VIN=11.4V VC=2.7V IO=0.5A CIN=1F CO=10F Quiescent current Iq(A) Dropout voltage VI-O(V) 0.25 0.2 0.15 0.1 0.05 0 -50 -25 0 25 50 75 100 125 150 Ambient temperature Ta (C) Ambient temperature Ta (C) Fig.14 Ripple Rejection vs. Input Ripple Frequency (PQ120DNA1ZPH) 80 Ripple rejection RR (dB) Fig.15 Ripple Rejection vs. Output Current (PQ120DNA1ZPH) 80 75 Ripple rejection RR (dB) 70 60 50 40 ei(rms)=0.5V VC=2.7V IO=0.3A 30 CO=10F 70 65 60 55 50 45 40 0 0.25 0.5 ei(rms)=0.5V f=120HZ VC=2.7V CO=10F Ta=Room temp. 20 VIN=14V 0.1 1 10 100 1 000 Input ripple frequency f (kHz) Ta=Room temp. VIN=14V 0.75 1 Output current IO(A) Fig.16 Power Dissipation vs. Ambient Temperature (Typical Value) Cu area 740mm2 Power dissipation PD (W) 2.0 Cu area 180mm2 Cu area 100mm2 Cu area 70mm2 1.5 Mounting PCB PCB Cu 1 Cu area 36mm2 0.5 Material : Glass-cloth epoxy resin Size : 50x50x1.6mm Cu thickness : 35m -20 0 20 40 60 80 100 120 0 -40 Ambient temperature Ta (C) Sheet No.: OP06051 6 |
Price & Availability of PQXXXDNA1ZPH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |